Best Wet Tile Saws for a Bathroom Remodel
A bathroom remodel lives or dies on the tile cuts. Shower walls need straight edges that sit tight against each other, floor tile needs clean rips that disappear under baseboards, and every outlet, pipe, and shower valve needs a neat hole or notch. A wet tile saw makes those cuts possible because water cools the diamond blade and washes away dust, which keeps edges cleaner and the air clearer than dry cutting.
Direct answer. The DEWALT D24000S is our top pick for most bathroom remodels. Its 10 inch blade, 25 inch rip capacity, and included stand handle large floor tile and long wall tile, and its water containment suits indoor work. If you want a lighter saw for standard size tile, the Ryobi WS722 is the budget tabletop pick. For large format tile, the DEWALT D36000 has the most cutting capacity in this set.
Comparison at a glance
Comparison
| Product | Best for | Key spec | Price range |
|---|---|---|---|
| DEWALT 10 In. Wet Tile Saw With Stand D24000S | Most bathroom remodels | 10 in blade, 25 in rip, stand included | Check current price |
| DEWALT 10-in High Capacity Wet Tile Saw D36000 | Large format tile | 37 in rip, 15 Amp motor, 1220 MWO | Check current price |
| Ryobi 7 in. Tabletop Tile Saw WS722 | Budget tabletop saw | 4.8 Amp, 20 in rip, bevel table | Check current price |
| SKIL 7-Inch Wet Tile Saw with HydroLock System 3550-02 | Clean indoor cutting | HydroLock water containment, 22 lbs | Check current price |
| RIDGID 9-Amp 7 in. Wet Tile Saw with Stand R4031S | Strong 7 in saw with stand | 9 Amp, 24 in rip, 2-1/4 in depth | Check current price |
How we researched
Compare specs
Maker specifications, checked side by side.
Read owner themes
Recurring strengths and complaints in owner reviews.
Check the fit
Size, power, compatibility and everyday use.
Verify before publishing
Details rechecked on the last verified date above.
How we research
We compared maker specs and owner review themes for 5 wet tile saws suited to cutting ceramic, porcelain, and stone tile for a bathroom remodel. We looked at blade size, rip and diagonal capacity, depth of cut, motor power, water containment, weight, and whether a stand is included, because those are the factors that decide whether a saw fits bathroom tile sizes and indoor work. Amazon.com showed Access restricted to AI agents on 2026-11-06, so 5 products could not be confirmed and ASIN_TBD is shown. No ASIN was guessed. We did not pick any model based on what it costs at Amazon. Where a maker page could not be opened, specs were taken from the maker operator manual or a retailer listing that reproduces maker data, and the source is listed below. We compared these saws from published specs and owner feedback. We did not run hands-on cutting sessions for this guide.
DEWALT 10 In. Wet Tile Saw With Stand D24000S
Best for most bathroom remodels, especially when floor tile runs large and wall tile runs long.
Key specs are a 10 inch wet tile saw with a jobsite stand included, a weight of 69 lbs, up to 25 inch rip cuts, 28 inch plunge cuts, and 18 inch by 18 inch tile on a diagonal. The rubber-matted cutting cart holds accuracy within 1/32 inch over 18 inches, and the saw offers water containment that allows for home set-up.
Pros:
- A 10 in blade and 25 in rip capacity handle the large floor tile and long wall tile common in bathroom remodels.
- At 69 lbs with a jobsite stand included, one person can move it and set it up at a comfortable working height.
- The rubber-matted cutting cart holds accuracy within 1/32 in over 18 in, which helps keep grout lines straight.
Con: It is larger and heavier than the 7 in tabletop picks, so it needs more floor space and a place to store the stand.
Owner review themes point to owners who praise the straight, accurate cuts, the sturdy rolling cart, and the way the stand puts the work at a comfortable height. The recurring complaints are the weight when moving it up stairs and the amount of floor space it takes up in a small home.
Price: Check current price.
Check current price on AmazonDEWALT 10-in High Capacity Wet Tile Saw D36000
Best for remodels with large format tile, such as 24 inch and 36 inch floor tile and long plank tile.
Key specs are a 10 inch wet tile saw with a 15 Amp motor rated at 1220 MWO, 120V corded power, a 37 inch rip cut capacity that reaches 41 inches with plunge, and an 8-1/2 inch crosscut capacity. It has 18 inches of cutting clearance left of the blade, accuracy within 1/32 inch over 30 inches, and a weight of 91 lbs. It includes a DW4764 porcelain tile blade, a submersible pump, a water pan, side and rear water trays, a cutting cart side extension, and an angle and rip guide, with a 3 year limited warranty.
Pros:
- The 37 in rip capacity and 18 in cutting clearance let it rip 36 in by 36 in tile in half, which suits large format bathroom floor tile.
- The 15 Amp motor rated at 1220 MWO gives strong power for dense porcelain and stone tile.
- The water tray system fully contains 18 in by 36 in and 24 in by 24 in tile, which helps keep the work area clean and dry.
Con: At 91 lbs it is the heaviest saw in this set, and it is the most saw most single bathroom remodels will ever need.
Owner review themes point to owners who praise the power through thick porcelain, the smooth rolling cart, and the capacity for oversized tile that smaller saws cannot handle. The recurring complaints are the weight, the size, and the price jump over the standard 10 inch saw for a one room job.
Price: Check current price.
Check current price on AmazonRyobi 7 in. Tabletop Tile Saw WS722
Best for budget conscious remodelers cutting standard size ceramic and porcelain tile on a bench or sturdy table.
Key specs are a 7 inch tabletop wet tile saw with a 4.8 Amp induction motor and a 7 inch continuous-rim diamond cutting wheel. It rips 20 inch tile, cuts 13 inch tile diagonally, and cuts ceramic, porcelain, and stone tile up to 1-1/4 inch thick. The tilting stainless-steel table gives bevel cuts at 22.5 degree and 45 degree angles, and the saw includes a locking rip guide, a miter guide, and a water reservoir system, with a 3 year manufacturer warranty.
Pros:
- A compact tabletop size and about 28 lbs make it easy to carry into a bathroom and set on a bench or sturdy table.
- A 20 in rip capacity and 13 in diagonal capacity cover most standard bathroom wall and floor tile.
- The tilting stainless-steel table gives bevel cuts at 22.5 degree and 45 degree angles for edges and corners.
Con: The 4.8 Amp motor is the least powerful in this set, so thick porcelain and stone cut slowly and the included blade can chip hard tile.
Owner review themes point to owners who praise the low cost, the compact size, and the way it handles a single bathroom without taking over the room. The recurring complaints are chipping on hard porcelain with the included blade, vibration on some units, and slow cutting through thick tile.
Price: Check current price.
Check current price on AmazonSKIL 7-Inch Wet Tile Saw with HydroLock System 3550-02
Best for remodelers who will cut tile inside the home and want the least water mess on the floor.
Key specs are a 7 inch wet tile saw with the HydroLock water containment system, a 5 Amp motor, a 7 inch continuous rim diamond blade, and a 3,600 RPM no load speed. It has a 3/4 inch depth of cut, a sliding side extension that supports tiles up to 18 inch by 18 inch, a rust-resistant aluminum table top, an adjustable rip fence with miter gauge, and bevel cuts at 0, 22.5, and 45 degrees. It weighs 22 lbs and has a 3 year limited warranty with registration. The box includes the saw, a 7 inch diamond blade, side extension, rip fence, miter gauge, blade guard, blade wrench, and instruction manual.
Pros:
- The HydroLock system keeps water contained near the blade, which matters when cutting tile inside a home during a remodel.
- The sliding side extension supports tiles up to 18 in by 18 in, so larger bathroom floor tile stays supported during the cut.
- At 22 lbs it is the lightest saw in this set, so it is easy to move between rooms and store between projects.
Con: The 3/4 in depth of cut is the shallowest in this set, so it cannot cut thick pavers or very thick stone tile.
Owner review themes point to owners who praise the water containment, the light weight, and the simple setup for a first tiling job. The recurring complaints are that the blade guard can block the view of the cut line, the rip fence can drift out of square, and the blade may need an upgrade for clean cuts in hard porcelain.
Price: Check current price.
Check current price on AmazonRIDGID 9-Amp 7 in. Wet Tile Saw with Stand R4031S
Best for remodelers who want the power of a larger saw in a 7 inch package, with a stand included for working at standing height.
Key specs are a 7 inch job site wet tile saw with a folding stand included, a 9 Amp, 1-3/4 HP motor running at 5,700 RPM, a 24 inch rip capacity, an 18 inch diagonal capacity, and a 2-1/4 inch depth of cut. It has a die cast aluminum table, a heavy duty arm, a laser guide, a beveling head, a water pump, and a water tray. It is covered by a lifetime service agreement with registration within 90 days of purchase.
Pros:
- The 9 Amp motor and 2-1/4 in depth of cut give the strongest cutting capacity of any 7 in saw in this set.
- A 24 in rip capacity and 18 in diagonal capacity handle large format tile that smaller tabletop saws cannot.
- The folding stand is included, so the saw works at standing height without a separate bench or table.
Con: The stand adds bulk and can feel wobbly at full height, and the whole package is heavier to move than a tabletop saw.
Owner review themes point to owners who praise the cutting power for the size, the deep cut capacity, and the value of the included stand. The recurring complaints are the stability of the stand, the water pump and drainage design, and the sliding tray needing adjustment to stay square.
Price: Check current price.
Check current price on AmazonQuestions to ask before buying
What size wet tile saw do I need for a bathroom remodel?
Match the saw to the largest tile you plan to cut. A 7 inch tabletop saw with a 20 inch rip capacity covers standard wall tile, subway tile, and floor tile up to about 12 inch by 24 inch. If your floor tile is 24 inch by 24 inch or larger, or you are cutting long plank tile, step up to a 10 inch saw with a 25 inch or larger rip capacity, such as the DEWALT D24000S or D36000. Also check depth of cut against your thickest tile. Most bathroom tile is under 1 inch thick, but thick stone or paver style tile needs the deeper cut of the RIDGID R4031S or a 10 inch saw. Buying more capacity than your tile needs costs floor space and money, while buying too little leaves you unable to finish the longest cuts.
How do I cut tile safely with a wet saw in a bathroom?
Wear eye protection with side shields, hearing protection for long sessions, and closed shoes that can get wet. Keep the blade guard in place and in working order, and never reach across the blade while it is spinning. Water and electricity need care together: plug the saw into a GFCI protected outlet, keep the cord and plug out of standing water, and unplug the saw before changing the blade or clearing the tray. Read the maker manual for your exact model before the first cut, and follow its safety rules for your saw. Let the blade reach full speed and get wet before you feed tile into it, feed slowly without forcing, and wait for the blade to stop fully before lifting tile off the table. Clean up slurry before it dries, because dried tile slurry is slippery and hard to remove from floors and grout.
How do I get clean cuts in porcelain tile without chipping?
Porcelain is dense and chips when the blade is dull, the feed is too fast, or the tile is not supported. Use a continuous rim diamond blade rated for porcelain, keep water flowing over the blade, and feed the tile slowly and steadily. Support long tile on both sides of the cut so it does not flex or snap near the end. Score the glazed face lightly first on very hard tile, then make the full cut. If edges still chip, try a higher quality porcelain blade, slow down further, and check that the fence and table are square to the blade. Cut a spare tile first to test the setup before cutting the tile that will show in the finished room.
How do I cut holes and notches for outlets, pipes, and shower fixtures?
Plan every hole before you cut, and mark the tile clearly with a marker or masking tape. For outlets and shower valves, use plunge cuts: lower the blade into the tile at the marked line, cut along each side of the opening, and break out the center piece carefully. For round pipe holes, drill with a diamond hole saw sized to the pipe, or make a series of small plunge cuts and clean the edge with a tile file. For L shaped notches around corners, cut from both sides and meet in the middle rather than forcing one long cut. Always cut with the finished face up or as the maker manual directs for your saw, and wear eye protection because small cut pieces can break free.
What should I do about water, slurry, and cleanup after cutting?
Set the saw where water and slurry cannot damage finished surfaces. A garage, driveway, or a room with floor protection works better than a finished bathroom floor. Keep a bucket nearby for the dirty water, and change the tray water when it turns thick with slurry, because dirty water cools poorly and leaves grit on the blade. At the end of the day, unplug the saw, drain the tray, rinse the pump and tray, and wipe the table and blade dry to prevent rust and buildup. Never pour tile slurry down a household drain, since it can settle and block pipes. Let it settle in a bucket, pour off the clear water, and dispose of the settled solids with household trash according to local rules.
Frequently asked questions
Do I need a wet tile saw for a small bathroom, or will a manual tile cutter work?
A manual snap cutter works for straight cuts in standard ceramic wall tile, and it is cheap and quiet. A wet tile saw is the better choice for porcelain, stone, thick tile, diagonal cuts, L cuts, plunge cuts for outlets, and any cut that is not a straight snap. If your bathroom has porcelain floor tile or any cutouts, a wet saw saves time and broken tile.
What is the difference between a 7 inch and a 10 inch wet tile saw?
A 7 inch saw is smaller, lighter, and cheaper, and it suits standard tile sizes up to about 20 inches on a rip cut. A 10 inch saw has a larger blade, a deeper cut, and a longer rip capacity, so it handles large format tile and thick stone. The tradeoff is weight, floor space, and cost. For one standard bathroom, a 7 inch saw is often enough. For large format tile, a 10 inch saw is the safer pick.
Can a wet tile saw cut glass tile and natural stone?
Yes, with the right blade. Glass tile needs a continuous rim diamond blade made for glass, a slow feed, and steady water flow to prevent chipping and cracking. Natural stone such as marble, granite, and slate cuts well on a wet saw with a diamond blade rated for stone, but stone is heavy and can be thick, so check the depth of cut first. Always test on a spare piece before cutting the tile that will show.
How much water does a wet tile saw use, and do I need a special pump?
Most tabletop saws in this set use a built-in reservoir or a small submersible pump that recirculates water from the tray, so they use only a few gallons per session. Keep the tray filled to the marked line and top it up as it splashes out. Change the water when it gets thick with slurry. The pumps included with these saws are sized for the saw, so no special pump is needed unless the maker manual calls for one.
Should I rent or buy a wet tile saw for one bathroom remodel?
Renting makes sense if you will tile one small bathroom and never tile again, because a good saw costs more than a weekend rental and needs storage. Buying makes sense if you have more than one bathroom, a kitchen backsplash, or future tile work planned, because the cost spreads across projects and you can work at your own pace. If you buy, a light tabletop saw such as the Ryobi WS722 or SKIL 3550-02 is easy to store, while a saw with a stand such as the DEWALT D24000S or RIDGID R4031S needs more storage space.
Sources
- DEWALT D24000S maker page: https://www.dewalt.com/en-us/product/d24000s/10-wet-tile-saw-stand (checked 2026-11-06)
- DEWALT D36000 maker page: https://www.dewalt.com/en-us/product/d36000/10-high-capacity-wet-tile-saw (checked 2026-11-06)
- Ryobi WS722 listing, Home Depot: https://www.homedepot.com/p/reviews/RYOBI-4-8-Amps-7-in-Blade-Corded-Tabletop-Wet-Tile-Saw-WS722/205049842/4 (checked 2026-11-06)
- SKIL 3550-02 review with maker specs, Pro Tool Reviews: https://www.protoolreviews.com/skil-3550-wet-tile-saw/ (checked 2026-11-06)
- RIDGID R4031S listing, Home Depot Canada: https://www.homedepot.ca/product/ridgid-9-amp-7-inch-portable-wet-tile-saw-with-stand/1000744927 (checked 2026-11-06)
- RIDGID R4031S review, ToolRev: https://www.toolrev.com/ridgid-r4031s-7-wet-tile-saw/ (checked 2026-11-06)